PVA-A18AA7 Mitsubishi 18,000 BTU Multi Position Mini Split Indoor Air Handler R410A
Part #MITPVAA18AA7
MFG #PVA-A18AA7
Cooling Capacity (BTU) : 18000
Heating Capacity (BTU) : 19000
Installation Type : Ducted
Manufacturer Name : Mitsubishi
Unit Type : Indoor
- Ducted Air Handler Indoor Unit
- Type Multi-Position
- Voltage Rating 208/230 Volt AC
- Current Rating 2.4 Amp (Motor)
- Frequency Rating 60 Hertz
- Number of Phases 1
- Power Rating 1570 Watt
- Cooling Capacity 18000 BTU/HR
- Temperature Control Type Thermostat
- Connection Type Terminal Block
- Operating Temperature 90 Deg F Dry, 73 Deg F Wet (Cooling)
- Installation Horizontal, Vertical
- Enclosure Material Steel
- Enclosure Finish Galvanized, Powder Coated Slate Gray
- Size 17" Width x 21-5/8" Depth x 50-1/4" Height
- Weight 113 Lb
- Approval ETL (Canada and US)
- Refrigerant Type R410A
- Heat Exchanger Type Plate Fin Coil
- Heating Capacity 19000 BTU/HR
- Airflow Rating 515/625/735 CFM (Dry)
- Energy Efficiency Ratio 20.2 SEER, 11.4 EER, 10 HSPF
- Minimum Circuit Ampacity 3 Amp
- Refrigerant Pipe Size 1/2" (Gas), 1/4" (Liquid)
- Sound Level 28 dB
- Applicable Standard AHRI
- Warranty 5 Year Limited (Parts), 7 Year Limited (Compressor)
- Install Instructions
Specification Sheet - Ducted Air Handler Provides a Solution to Cool and Heat Large Zones. Highly Efficient Totally Enclosed ECM Motor. Selectable External Static Pressure: 0.3, 0.5 and 0.8" WG with 3 Fan Speeds at Each Static Setting.
- stylecontent