Monarch 5.00 80 Degree PL HollowCone Oil Burner Nozzle
Part #MNR5.0080PLP
MFG #5.0080PLP
Flow Rate : 5.00 GPH
Manufacturer Name : Monarch
Spray Angle : 80 Deg
Spray Pattern : PL, HollowCone
- Monarch produces oil burner nozzles for all oils with viscosity to 5 mm2/s (cSt). Special nozzles can be used for oils with a viscosity up to 13 mm2/s (cSt)
- All Monarch nozzles are stamped with the following characteristics, subject to modification on adoption of CEN standards-the flow (in USGPH at l00 PSI = 6.895 bar), (soon, capacity at 10 bar and CEN references), spray angle - letters to identify the series of spray patterns - the reference MTD-92 - the Monarch trade mark
- Each Monarch MTD-92 nozzle is individually tested at several different production stages to assure perfect conformity with master nozzles of each series
- The spray patterns (i.e. hollowcone or solid cone) described below refer to the tests carried out with a 60 Degree angle at a75 mm distance from the nozzle orifice. In nozzles of a 60 Degree spray angle or less, and forlow flows in particular, the empty section of a hollow cone becomes smaller. The difference between hollow cone and solid cone practically disappears
- Specification Sheet
- This series represents an extension of the “NS” type spray pattern to larger capacity sizes. Spray is not as finely atomized as the “PLP” series, but produces the best results in equipment specifying hollow cone nozzles.
- stylecontent