WE0511HH Goulds 1/2 HP 115V 1 Phase 3.87" High Head Submersible Effluent Pump
Part #GOUWE0511HH
MFG #WE0511HH
Manufacturer Name : Goulds
- Effluent Pump
- Type Submersible
- Applicable Standard UL 778, CSA 22.2 108, CSA (Canada and US)
- Discharge Size 2"
- End Connection Threaded Outlet
- Overall Dimensions 11-1/2" Length x 8-1/2" Width x 16" Height
- Flow Rate 140 GPM
- Discharge Head 128'
- Casing Material Cast Iron
- Shaft Material Stainless Steel
- Impeller Material Cast Iron
- Impeller Design Semi Open
- Warranty 12 Month from Date of Installation, 18 Month from Date of Manufacture
- Shaft Seal Details Silicon Carbide-Silicon Carbide Face Mechanical Seal
- Solid Size 3/4"
- Power Cord Length 20'
- Power Rating 0.5 HP
- Input Supply Rating 115 Volt at 60 Hertz 1 Phase 14.5 Amp
- Speed Rating 3450 RPM
- Temperature Rating 104 Deg F Continuous, 140 Deg F Intermittent
- Motor Type Class B Insulation, Oil for Lubrication, Efficient Heat Transfer
- Inclusions/Features Impeller, Casing, Mechanical Seal, Motor Shaft, Motor, Ball Bearing, Power Cable, Casing O-Ring, Fastener
- Application Home, Farm, Trailer Court, Motel, School, Hospital, Industry, Effluent System
- Thermal Load Protection Automatic Reset
- Motor Efficiency 54 percent
- Impeller Size 3.88" Diameter
- Weight 60 Lb
- Install Instructions
Specification Sheet - Impeller are Cast Iron, Semi-Open, Non-Clog with Pump-Out Vanes for Mechanical Seal Protection. Balanced for Smooth Operation. Casing are Cast Iron Volute Type for Maximum Efficiency 2" Threaded Discharge. Mechanical Seal are Silicon Carbide Sealing Faces. Stainless Steel Metal Parts, Buna-N Elastomers. Shaft are Corrosion-Resistant, Stainless Steel. Threaded Design, Locknut on All Models to Guard Against Component Damage on Accidental Reverse Rotation. Capable of Running Dry Without Damage to Components. Designed for Continuous Operation When Fully Submerged. Capacitor Start Motors for Maximum Starting Torque. Built-In Overload with Automatic Reset. SJTOW or STOW Severe Duty Oil and Water Resistant Power Cords. 12 Month from Date of Installation, 18 Month from Date of Manufacture.
- stylecontent