P8304-K-NA Kohler Rite-Temp Valve Body And Pressure-Balance Cartridge Kit Project Pack
Part #KP8304KNA
MFG #P8304-K-NA
Manufacturer Name : Kohler
- Shower Valve Body and Cartridge Kit
- Type Rough-In, Pressure Balancing
- Inlet Size 1/2 Inch
- Valve Material Machined Brass
- Inlet Connection Threaded
- Outlet Connection 1/2 Inch Threaded
- Flow Rate 5 GPM at 45 PSI
- Inclusions/Features Valve Body, Pressure Balancing Cartridge, Rough-In Guide, Mud Guard
- Used On Item Shower
- Exclusions Valve Trim
- Applicable Standard ASME A112.18.1/CSA B125.1, ASSE 1016/ASME A112.1016/CSA B125.16
- Size 4-13/16 Inch Length x 4-5/8 Inch Width x 5 Inch Height
- Inner Diameter 5/8 Inch
- Thread Size 14 TPI
- Material Copper (Tubing)
- Pressure Rating 20 to 150 PSI
- Temperature Rating +/- 3 Deg F
- Install Instructions
Specification Sheet - Single Lever Design Cycles from off Through Cold to Hot. Provides Temperature Regulation and Automatic Anti-Scald Protection. One Piece Cartridge Design Simplifies Installation and Maintenance. Adjustable High Temperature Limit Stop to Control Maximum Water Temperature. Designed for Use in Standard, Back to Back and Thin Wall Installations. Valve Body Features Integral Mounting Locations and Symmetrical Valve Inlets to Simplify Installation. Cartridge is Reversible for Installations Where Hot and Cold Supplies are Reversed. Rough-In Guide Designed for Both Standard and Thin Wall Installations. Limited Lifetime Warranty.