PDP200A 200,000 BTU NAT GAS PV UNIT HEATER
Part #MODPDP200AN
MFG #PDP200A-N
Manufacturer Name : Modine
- Power Vented Unit Heater
- Type Corrosion Resistant
- Voltage Rating 115 Volt
- Current Rating 5.15 Amp
- Number of Phases 1
- Capacity 200000 BTU/HR Input, 160000 BTU/HR Output
- Control Type Thermostat
- Fan/Motor Type 115 Volt 1/6 HP 1075 RPM 2.8 Amp Permanently Split Capacitor Motor
- Air Flow Rate 2870 CFM
- Material 22 Gauge Aluminized Steel
- Finish Polyester Powder Painted
- Color Gray-Green
- Size 25-5/8" Width x 25" Depth x 40-1/4" Height
- Application Commercial, Residential
- Gas Type Natural Gas
- Fan Dimension 20" Diameter
- Weight 239 Lb
- Warranty 10 Year Limited
- Install Instructions
- Single Stage Gas Valve; Ignition Controller; Low Voltage Terminal Board; Maximizing Seasonal Efficiency through the Use of a Collector Box and the Power Exhauster; A Power Exhaust that Can be Rotated 180 Degree: The Unit Can be Vented Vertically or Horizontally; In termittent Pilot-Ignition System with Continuous Retry, at No Extra Charge; A Safety Pressure-Switch to Assure Safe Venting Conditions; Designed to Utilize the Smallest Diameter Vent Pipe Possible; Wing Screws So that the Bottom Pan Can be Dropped without a Screwdriver or Nut Driver; A Level Hanging Mechanism for Easy Field Adjustments After Adding Accessories that May Change the Unit’s Center of Gravity; 10 Year Limited Warranty
- stylecontent