Brand : Hydrolevel
Manufacturer Name : Hydrolevel
- Boiler Low Water Cut-Off
- Item Low Water Cut-Off
- Type Probe
- Applicable Standard UL, CSA
- Actuation Type Manual
- Switch Type SPDT
- Overall Dimensions 5-1/2" Length x 6-2/8" Width x 5-9/16" Height
- Input Supply Rating 4 VA at 120 Volt AC 60 Hertz
- Pressure Rating 160 PSI
- Media Handled Water
- Inclusions/Features LED Indicating Light
- Application Residential/Commercial
- Enclosure NEMA 1
- Switching Capacity 5.8 Amp (Full Load), 34.8 Amp (Locked Rotor)
- Construction Material Control Housing Galvanized Steel, Probe Insulator Glazed Ceramic, Probe Tip 316 Stainless Steel, Probe Nut 3/4" or 1/2" Threaded brass
- Install Instructions
Specification Sheet - Interrupts Power Immediately in a Low Water Condition; Burner Circuit Locks-Out if Water Remains Below Probe for 30 Seconds; Manual Reset will Not Trip Due to Power Failures; Can also be Used as a Secondary Cut-Off on Steam Boiler; Low Maintenance, No Moving Parts to Wear Stick or Hang up as in Float Device
- stylecontent